會議論文

學年期 標題 Sdgs 更新時間
089 / 1 白金薄膜感測器應用於微流道的現地溫度量測 2010-06-16
094 / 1 應用矽膠微機電技術於微型壓力感測器之新型封裝 2010-06-16
093 / 1 PDMS應用於壓阻式壓力感測器之新型封裝 2010-06-16
094 / 2 A circular microchannel integrated with embedded spiral electrodes 2010-06-16
094 / 2 A flapping MAV with PVDF-parylene composite skin (Best Student Paper Award) 2010-06-16
094 / 1 A micro chip with GA(glutaraldehyde)-crosslinked gelatin micro patterns for the culture of single cell 2010-06-16
094 / 1 An integrated surface plasmon resonance waveguide device for immuno-sensor 2010-06-16
094 / 2 Design and fabrication of a diaphragm type thermo-buckled microactuators 2013-09-09
090 / 1 電流體驅動(EHD)微幫浦的研製 2010-06-16
088 / 1 矽質微熱管之研製與測試 2010-06-16
094 / 2 Zeta-potential effect on EHD flows 2010-06-16
093 / 1 拍撲式微飛行器之設計與製作 2010-06-16
091 / 1 微冷卻器之製程技術研究 2010-06-16
087 / 1 Micro force sensors using to identify the initiation time of an impact excitation in ultrasonic NDT 2010-06-16
085 / 2 An easy method to control the membrane thickness of a pressure sensor by using the (111)-faced V grooves on (110) silicon wafers 2010-06-16
086 / 1 A new method to fabricate the blazed gratings by the anisotropic etching on the(110)silicon wafers 2010-06-16
085 / 1 Capacitive accelerometers and pressure sensors using nearly identical precessing precedures 2010-06-16
087 / 2 A new strategy to reduce the chip size of bulk-machined sensors 2010-06-16
088 / 1 Micro pressure sensor with submillimeter size by the silicon bulk micromachining 2014-10-30
092 / 2 Fabrication of SU-8 embedded microchannels with circular cross-section 2010-06-16
088 / 1 A micro fluidic system of micro channels with on-site sensors by the silicon bulk micromachining 2010-06-16
093 / 2 Buckled-type valves integrated by parylene micro-tubes 2010-06-16
087 / 2 Binary deposition method using standard CMOS structural layers to fabricate optical gratings and microlenses 2011-05-02
087 / 1 半導體微型加速度計梳狀結構之流場阻尼分析 2010-06-16
092 / 2 Preesure-sensor array using as an experiment platform for microfluidics 2010-06-16
092 / 2 A new method of anti-stiction for parylene MEMS process 2010-06-16
090 / 1 微流道中毛細驅動液體的速度探討 2010-06-16
087 / 1 (110)orientation silicon based micro heat exchanger channel 2010-06-16
089 / 1 星形與平板式微熱管之研製與性能分析比較 2010-06-16
093 / 1 50微米尺寸的CMOS微型壓力感測器 2010-06-16
093 / 1 微圓管非平面電極之研製 2010-06-16
094 / 1 以聚對二甲苯微機電技術製作之熱挫曲式微型致動器 2010-06-16
093 / 1 拍撲式微飛行器之設計、製作與測試 2014-05-21
094 / 2 A Novel Faculty Training Program by Modified Synchronous Teaching for Multidisciplinary Education in Taiwan 2010-06-16
088 / 1 Micro fluidic system of micro channels with on-site sensors by silicon bulk micromachining 2010-06-16
091 / 1 方形島塊高壓力負載微型壓力計之製造與分析 2010-06-16
093 / 1 高分子薄膜材料應用於電流體驅動(EHD)幫浦之研製 2010-06-16
091 / 1 整合氧化銦錫(ITO)電極之電液體驅動(EHD)微幫浦 2010-06-16
091 / 1 利用聚對二甲苯微機電技術製作微感測器與微致動器 2010-06-16
089 / 1 電腦輔助設計應用於微型壓力感測器之性能評估 2010-06-16
094 / 1 戊二醛交聯明膠之微成型與其在細胞培養之應用 2010-06-16
093 / 1 聚對二甲苯可彎折式閥門 2010-06-16
094 / 1 以互補式金氧半標準積體電路製程及後加工程序製作50微米尺寸之力感測器 2010-06-16
090 / 1 Marching velocity of capillary meniscuses in microchannels 2015-07-31
091 / 1 The micro ion drag pump using indium-tin-oxide (ITO) electrodes 2015-07-02
090 / 1 Photo-patternable gelatin as protection layers in surface micromachinings 2015-07-31
093 / 2 The testing machine for micro-sensors subjected to different states of pressure and temperature 2015-08-05
097 / 1 Fabrication processes of integrated multi-analyte biochip system for implantable applications 2011-10-14
097 / 2 Rapid dielectrophoresis assembly of single carbon nanocoil on an AFM probe tip 2011-10-14
098 / 1 A cell culture system with better spatial and time resolution 2011-10-14
098 / 1 Flexural stiffness effect on lift force of flapping micro aerial vehicles 2011-10-14
098 / 1 Gas permeation in PDMS monitored by on-site pressure sensors 2014-08-21
098 / 1 An electro-active nano-valve array for reusable drug delivery system 2011-10-14
098 / 2 Effect of flexural stiffness on the aerodynamic forces of flapping MAVs 2011-10-14
099 / 1 A PDMS-based thermopneumatic micropump with parylene inner walls 2011-10-14
099 / 2 Confined fractal patterns in gelatin 2014-08-21
095 / 1 應用於留置針型生醫感測系統之新型微液體驅動器 2011-10-14
095 / 1 圓管挫曲式微型閥門之研製 2011-10-14
095 / 1 A circular microchannel embedded with spiral electrodes used for fluid transportation 2011-10-14
095 / 1 Completely parylene-coated neuroprobe for chronic recording 2011-10-14
095 / 1 SU-8 buckled-type microvalves switched by surface tension forces 2014-07-30
095 / 1 EHD micro-boat 2011-10-14
096 / 1 A novel DNA amplification chip of polymer-substrate 2011-10-14
096 / 2 A thermopneumatic valveless micropump with PDMS-based nozzle/diffuser structure for microfluidic system 2011-10-14
096 / 2 The attachment of tumor cells to the micropatterns of glutaraldehyde (GA)-crosslinked gelatin 2011-10-14
096 / 2 A gas-leakage sensor for PDMS chip frames 2011-10-14
097 / 1 A biomimetic figure-of-eight flapping induced by flexible wings 2011-10-14
097 / 1 A micro-aerial-vehicle (MAV) with figure-of-eight flapping induced by flexible wing frames 2011-10-14
097 / 1 The arrowed surface ratchets with hydrophobic parylene for droplet transportation 2011-10-14
097 / 1 The micropatterns of glutaraldehyde-crosslinked gelatin as ECM for attachment of tumor cells 2014-09-22
099 / 2 Fractal grooves applied to passive micro-mixers 2014-08-21
099 / 2 The minimum time estimation for initiating tumor-cell attachment 2014-08-13
099 / 2 A parylene-LED wingbeating indicator for visual remote sensing 2011-10-14
095 / 2 Smart flapping wings with a PVDF sensor to modify aerodynamic performance of a micro UAV 2014-07-30
100 / 1 An ultra-small Wankel engine by MEMS process 2014-08-22
100 / 2 Design of a small Wankel engine 2014-01-07
100 / 2 Blood vessels by fractal gelatin 2013-09-06
100 / 2 Development of flapping ornithopters by precision injection molding 2012-12-11
101 / 1 Wingtip trajectory of a flapping micro-air-vehicle in its forward flight 2012-12-11
101 / 1 New flapping mechanisms of MAV Golden Snitch 2014-09-22
092 / 2 頂尖科學家對信仰的部分觀點 2014-09-04
098 / 2 「到底有沒有神」札記 2014-08-25
100 / 2 「到底有沒有神」增補嘗試集(一) 2014-08-25
101 / 1 「淡江金探子」拍翼機之研製 2014-09-22
094 / 2 拍撲式微飛行器製作及PVDF機翼現地升力量測研究 2013-07-23
098 / 1 微飛行器風洞測試訊號截取半自動化之研究 2014-10-22
089 / 2 空氣黏滯效應在側向振動梳狀微結構之研究 2014-04-30
092 / 1 微流道內的表面能與接觸角探討 2014-09-27
088 / 1 矽質微型感測器應用於微流道的現地量測 2014-10-23
089 / 2 微型流道熱沈與熱管之製作與實驗 2014-05-21
094 / 1 Design and fabrication of a diaphragm type thermo-buckled microactuators 2014-10-13
101 / 2 On scaling laws of flapping UAVs 2014-07-14
102 / 1 「淡江金探子」拍翼機之研製 2014-07-14
101 / 2 Steel-based tail actuators for micro-air-vehicles 2014-09-23
101 / 2 Dynamic cell attachment of HepG2 in a microchannel 2014-07-14
102 / 1 2D quasi-steady flow investigation of a flexible flapping wing 2014-07-14
097 / 1 拍翼式飛行器之飛行測試及仿生式尾翼控制器之研製 2013-12-13
097 / 1 結合LED 之拍翼製作與其翼尖軌跡顯像技術 2013-12-13
097 / 1 精密射出成型於微飛行器零組件成形之研究 2013-12-13
080 / 1 穿音速膨脹與壓縮流動邊界值問題之相似解及 其應用 2014-05-01
095 / 1 拍撲式微型飛行系統之研製(I) 2014-05-15
095 / 1 智慧型微冷卻系統之感測與驅動技術開發(III) 2014-05-15
096 / 2 The Attachment of Tumor Cells to the Micropatterns of Glutaraldehyde (Ga)-Crosslinked Gelatin 2014-05-14
096 / 2 A Biomimetic Figure-of-Eight Flapping of Micro Aerial Vehicles (MAVS) Illuminated by LEDs 2014-05-14
096 / 1 可撓機翼架構誘導之仿生八字形拍翼 2014-05-15
089 / 1 白金薄膜感測器應用於微流道的現地溫度量測 2014-10-30
089 / 1 星形與平板式微熱管之研製與性能分析比較 2014-05-08
088 / 1 矽質微型感測器應用於微流道的現地量測 2014-05-08
089 / 1 ANSYS應用於微型壓力感測器之性能評估 2014-05-07
088 / 1 Micro Pressure Sensor with Sub-mm Size by the Silicon Bulk Micromachining 2014-10-30
096 / 1 應用於留置針型生醫感測系統之新型微液體驅動器 2014-05-14
094 / 1 拍撲式微飛行器之製作及其現地升力量測研究 2014-05-14
096 / 2 拍翼式微飛行器之設計及改良 2014-05-14
096 / 1 拍撲式微飛行器之減重設計及其空氣動力性能調校研究 2014-05-14
096 / 2 A Gas-Leakage Sensor for PDMS Chip Frames 2014-05-14
096 / 2 Adjustable Wetting Behavior of Parylene Surface Using to Liquid-Droplet Locomotion 2014-05-08
096 / 2 Surface Tension-Driven Micro Actuator to Micro Aerial Vehicles (MAVS) 2014-05-08
096 / 2 A PDMS-Based Thermopneumatic Micropump with Parylene Inner Walls 2014-05-08
088 / 2 Semi-SOI Pressure Sensors as Lab-on-Chip Systems Applied to Micro Fluid Dynamics 2014-05-08
102 / 2 Photonic nanojet in non-spherical micro-particles 2014-04-23
084 / 1 超音速、穿音速與極音速之遠場非線性漸近理論 2014-04-28
093 / 2 The micro aerial vehicle (MAV) with flapping wings 2014-07-17
103 / 1 On Surface Stiction of a Cantilever Beam 2015-05-11
103 / 1 A Novel Flapping Mechanism for 20cm-Wingspan Micro Air Vehicle 2015-05-11
103 / 2 Acoustic Comparison of PET and Latex Wings for Flapping Micro-Air-Vehicles 2015-05-11
091 / 2 In-situ monitoring of thickness of quartz membrane during batch chemical etching using a novel micromachined acoustic wave sensor 2015-07-02
093 / 1 A liquid-based gravity-driven etching-stop technique and its application to wafer level cantilever thickness control of AFM probes 2015-07-02
094 / 1 Micro Pressure Sensors of 50 μm Size Fabricated by a Standard CMOS Foundry and a Novel Post Process 2015-07-02
092 / 1 The patterning of glutaraldehyde-crosslinked gelatin 2015-07-08
104 / 1 Re-STOL Micro Ornithopters- with 4 Improvement Strategies 2016-03-11
103 / 2 Robust Vision Based Target Tracking Algorithm for MAV Navigation System 2016-03-11
103 / 2 Toward Long-Endurance Flight- Tamkang’s Aspect of Micro Ornithopters 2016-03-11
104 / 2 The Wind-tunnel Test and Unsteady CFD of an Ornithopter Formation 2017-01-12
105 / 1 An Arduino-Based IMU/MCU for 15-gram Flapping Wing MAVs 2017-01-12
105 / 2 Arduino-Based Autonomous Flight Control of FWMAVS 2017-12-08
105 / 2 New Vortex-based Device Using Dragonfly Wing to Reduce the Chip Size 2017-12-08
105 / 2 The Application of Dragonfly Wings to Electromechanical Engineering 2017-12-08
106 / 1 An All Servo-Driven Ornithopter 2017-12-08
106 / 1 Image Processing Framework towards motion estimation and control of multiple FWMAVs 2017-12-08
106 / 1 A kinematic study on the flapping wing trajectory extracted from Tamkang’s Golden Snitch 2017-12-08
106 / 1 Preliminary study on altitude and heading control of FWMAVs 2017-12-08
106 / 2 Numerical and Experimental Verifications on the Wing Design of a Flapping Wing Micro Air Vehicle 2018-05-22
106 / 2 The development of flapping micro air vehicle Golden-Snitch at TKU Taiwan 2018-05-22
106 / 2 Enhancing the wear properties of 3D-printing parts for ornithopters by parylene coating 2019-04-19
107 / 1 Tiny part design for flapping mechanism used in ornithopters by 3D printing #04.優質教育 #09.產業創新與基礎設施 #17.夥伴關係 2019-04-19
107 / 1 Visualization of a flapping wing motion using soap-film membrane #04.優質教育 #09.產業創新與基礎設施 #17.夥伴關係 2019-04-19
107 / 2 利用皂膜顯像術量測拍翼之非定常流場 #04.優質教育 #09.產業創新與基礎設施 2019-05-31
108 / 1 Design of a wing rotation mechanism for a FWMAV 2019-05-31
108 / 1 Micro-molding fabrication and aerodynamic analysis of corrugated flapping wings #04.優質教育 #09.產業創新與基礎設施 2020-09-10
108 / 1 Wing rotation FWMAV using servos #04.優質教育 #09.產業創新與基礎設施 2020-09-10
108 / 1 Design of a wing rotation mechanism for a FWMAV #04.優質教育 #09.產業創新與基礎設施 2020-09-16
109 / 1 Designing PDMS face masks against virus via aerosol #07.可負擔的潔淨能源 #08.尊嚴就業與經濟發展 #09.產業創新與基礎設施 #17.夥伴關係 2021-03-19
109 / 1 Enhancing the aerodynamic performance of flapping wings using check-valves #07.可負擔的潔淨能源 #08.尊嚴就業與經濟發展 #09.產業創新與基礎設施 #17.夥伴關係 2021-03-19
109 / 1 多拍翼編隊之流場模擬初探 #04.優質教育 #05.性別平等 #17.夥伴關係 2021-03-19
109 / 2 具轉翼功能之公克級拍翼機構設計與製作 #04.優質教育 #09.產業創新與基礎設施 #11.永續城市與社區 2021-10-21
109 / 2 安裝於拍翼表面之金氧半微機電流速計開發 #03.良好健康和福祉 #04.優質教育 #05.性別平等 #09.產業創新與基礎設施 2021-10-21
109 / 2 Self-heating CMOS flow sensor #03.良好健康和福祉 #04.優質教育 #05.性別平等 #09.產業創新與基礎設施 2022-08-15
110 / 1 A transparent face mask with microchannel against virus via aerosol #03.良好健康和福祉 #04.優質教育 #06.潔淨水與衛生 #09.產業創新與基礎設施 2021-10-21
111 / 2 Effects on aerodynamic forces due to leading-edge twisting in flapping wing #04.優質教育 #17.夥伴關係 2024-03-06
111 / 2 Performance evaluation of CMOS MEMS sensors using a low-cost wireless data acquisition system #04.優質教育 #07.可負擔的潔淨能源 #17.夥伴關係 2024-03-06
112 / 1 以教研合一的動態競爭觀點改良『機械簡史』之教學方法 #04.優質教育 2024-01-02
112 / 1 應用於風力機葉片流場之微機電現地量測 #09.產業創新與基礎設施 2024-01-02
112 / 1 Nanomaterial coated side polished fiber for early diagnosis of cardiovascular disease by label-free sensing of troponin biomarker #03.良好健康和福祉 #09.產業創新與基礎設施 #17.夥伴關係 2024-01-02