期刊論文

學年期 標題 Sdgs 更新時間
088 / 1 Fabrication of 3-D micro-coils with ferro-magnetic cores using a standard CMOS process 2010-06-16
093 / 1 A Micromachined Microwave Switch Fabricated by the Complementary Metal Oxide Semiconductor Post-Process of Etching Silicon Dioxide 2013-11-22
090 / 1 The SOI-like method of reducing the die size of bulk-micromachined sensors 2010-06-16
087 / 2 微小世界與微機械 2010-06-16
086 / 1 微機電感測器於非破壞檢測之應用 2010-06-16
091 / 2 微小尺寸下的液體量測與驅動 2010-06-16
092 / 2 The marching velocity of the capillary meniscus in a microchannel 2017-05-02
087 / 1 A method using V-grooves to monitor the thickness of silicon membrane with m resolution 2017-06-13
089 / 2 CMOS microelectromechanical bandpass filters 2016-12-28
093 / 1 Fabrication of SU-8 embedded microchannels with circular cross-section 2017-01-11
093 / 2 A piezoresistive micro pressure sensor fabricated by commercial DPDM CMOS process 2016-12-12
094 / 1 Electro-Hydro-Dynamic (EHD) Micropumps with Electrode Protection by Parylene and Gelatin 2017-01-10
085 / 2 半導體微型感測器與非破壞性檢測 2010-06-16
084 / 2 固態加速度計簡介 2010-06-16
091 / 1 The Microsensor Technology Using to Identify the Initiation Time of Impact Induced Elastic Waves 2017-05-02
094 / 1 The Parylene Bowed-Type Valves 2017-05-02
096 / 1 Attachment of tumor cells to the micropatterns of glutaraldehyde (GA)-crosslinked gelatin 2010-08-10
095 / 2 Surface Tension-Driven Microvalves with Large Rotating Stroke 2017-03-29
098 / 1 Light Flapping Micro Aerial Vehicle Using Electrical-Discharge Wire-Cutting Technique 2013-06-27
098 / 2 Comparison of different metal film thicknesses of COC-substrate polymerase chain reaction chips with single-side and double-side heaters 2013-09-25
099 / 1 On gas-permeation in PDMS 2013-09-25
097 / 2 Novel Fabrication of Full Parylene-Isolated Neuroprobes 2013-07-11
097 / 1 Gas Permeation in Polydimethylsiloxane in-situ Monitoring by Silicon Pressure Sensors 2013-06-27
098 / 1 Weight Reduction of Flapping Micro Aerial Vehicles by Electrical Discharge Wire Machining 2014-07-01
098 / 2 微機電拾遺錄第24回: 十五屆國際傳感器會議紀實 2011-10-14
096 / 1 A circular microchannel integrated with embedded spiral electrodes using for fluid transportation 2016-11-14
096 / 1 A flapping MAV with PVDF-parylene composite skin 2017-06-14
096 / 1 A new packaging method using PDMS for piezoresistive pressure sensors 2017-06-15
099 / 2 Flexural stiffness on flapping MAVs 2012-02-17
092 / 2 Special issue on micro system technology 2011-10-20
095 / 2 Micro-viscometer based on electrowetting on dielectric 2013-12-09
100 / 1 A PDMS-based thermo-pneumatic micropump with Parylene inner walls #04.優質教育 2019-09-27
100 / 2 Wing Stiffness on Light Flapping Micro Aerial Vehicles 2019-03-12
100 / 2 Development of flapping ornithopters by precision injection molding #04.優質教育 #17.夥伴關係 2019-03-12
101 / 1 The micro-air-vehicle Golden Snitch and its figure-of-8 flapping 2019-03-08
101 / 1 Autopilots for Ultra Lightweight Robotic Birds: Automatic Altitude Control and System Integration of a Sub-10 g Weight Flapping-Wing Micro Air Vehicle 2024-04-12
101 / 1 Using stereo vision to acquire the flight information of flapping-wing MAVs 2019-03-08
101 / 1 Chaotic vessels fabricated by fractal gelatin 2019-03-12
091 / 2 A Study of Viscous Air Damping in Laterally Oscillating Micro Comb Structures 2014-06-09
101 / 1 Autopilots for Ultra Lightweight Robotic Birds: Automatic Altitude Control and System Integration of a Sub-10 g Weight Flapping-Wing Micro Air Vehicle 2024-04-12
095 / 1 微機電拾遺錄(11)--體型微細加工 -2- 2013-04-11
095 / 1 微機電拾遺錄(10)--體型微細加工 -1- 2013-04-11
088 / 2 發行國內可轉換公司債宣告效果之研究—以台灣上市公司例 2013-04-11
092 / 2 聚對二甲苯(parylene)微機電製程簡介 2013-04-11
093 / 2 微機電拾遺錄(2)--先研發感測器？還是致動器？ 2013-04-11
093 / 2 微機電拾遺錄(3)--微馬達製程技術的回顧 2013-04-11
094 / 1 微機電拾遺錄(4)--「聚對二甲苯」微機電技術 2013-04-11
094 / 1 微機電拾遺錄(5)--面型微細加工的材料與製程 2013-04-11
094 / 2 微機電拾遺錄(8)--微機電發展演進 -3- 2013-04-11
088 / 1 微冷卻器簡介 2013-04-11
094 / 2 微機電拾遺錄(6)--微機電發展演進 -1- 2013-04-11
093 / 2 微機電拾遺錄(1)--半導體微型壓力感測器之非線性課題 2013-04-11
095 / 1 微機電拾遺錄(9)--春風又綠紫禁城─2006年世界微機電高峰會議小記 2013-04-11
096 / 2 微機電拾遺錄(17)--微機電入門者的挑戰與鍛鍊 2013-04-11
096 / 1 微機電拾遺錄(16)--體型與面型微細加工的比較 2013-04-11
095 / 2 微機電拾遺錄(13)--晶圓對準技術 2013-04-11
095 / 2 微機電拾遺錄(12)--體型微細加工 -3- 2013-04-11
096 / 1 微機電拾遺錄(15)--「里昂論劍」2007年國際換能器會議(Transducers'07) 2013-04-11
096 / 1 微機電拾遺錄(14)--群英相會威尼斯─2007年世界微機電高峰會 2013-04-11
094 / 2 微機電拾遺錄(7)--微機電發展演進 -2- 2013-04-11
098 / 1 高深寬比光阻SU-8微加工技術 2013-04-11
097 / 1 微機電拾遺錄(19)--阿里郎之約─2008年世界微機電高峰會 2013-04-11
097 / 1 微機電拾遺錄(20)--阿里郎之約─2008年世界微機電高峰會 2013-04-11
097 / 2 微機電拾遺錄(21)--慣性感測元件 2013-04-11
097 / 2 微機電拾遺錄(22)--聚二甲基矽氧烷(PDMS)微加工技術 2013-04-11
097 / 1 微機電拾遺錄(18)--由數位影像處理晶片細談靜電式致動器之穩定性課題 2013-04-11
098 / 2 Fabrication and testing of surface ratchets primed with hydrophobic parylene and hexamethyldisilazane for transporting droplets 2013-06-27
090 / 1 The Zeroth Order Solution of the Velocity Field around Micro Comb Structures with Lateral Oscillation 2013-07-11
085 / 2 The Application of V-Groove Solt-Array Method to the Piezoresistive Pressure Sensors 2013-07-11
084 / 1 A wide‐g range silicon piezoresistive accelerometer 2013-07-11
095 / 1 Buckled-type valves integrated by parylene micro-tubes 2013-08-08
092 / 2 The micro ion drag pump using indium-tin-oxide (ITO) electrodes to resist aging 2013-08-08
091 / 1 Photo-patternable gelatin as protection layers in low-temperature surface micromachinings 2013-08-08
090 / 1 Phase synchronization of micro-mirror arrays using elastic linkages 2013-08-08
096 / 1 Flapping wings with PVDF sensors to modify the aerodynamic forces of a micro aerial vehicle 2013-08-08
101 / 1 3D Flapping Trajectory of a Micro-Air-Vehicle and its Application to Unsteady Flow Simulation 2019-03-08
101 / 1 科學工藝，振翅高飛－拍翼機之研製 2013-12-09
089 / 1 微型流道熱沉與熱管之製作與實驗 2014-05-02
102 / 2 2D quasi-steady flow simulation of an actual flapping wing 2019-03-08
094 / 1 The Micro Patterning of Glutaraldehyde (GA)-Crosslinked Gelatin And Its Application To Cell-Culture 2015-04-08
103 / 1 On Deriving Surface Tension Force in MEMS 2019-03-08
103 / 2 Practical Flapping Mechanisms for 20cm-span Micro Air Vehicles 2019-03-08
103 / 2 Studies on Surface Tension Influenced Critical Gap in Cantilever Microstructures 2019-03-08
104 / 1 Development Scenario of Micro Ornithopters 2019-03-08
104 / 1 A Novel Vision based Protocol for Controlling Flapping Wing Vehicles in Indoor Surveillance Mission 2019-03-08
104 / 2 Experimental studies on 3D printed parts for rapid prototyping of micro aerial vehicles 2019-03-08
105 / 2 Rapid prototyping of flapping mechanisms for monoplane and biplane ornithopter configurations #04.優質教育 #17.夥伴關係 2024-01-23
106 / 1 Arduino-based altitude and heading control of a flapping wing micro-air-vehicle #04.優質教育 #17.夥伴關係 2019-03-08
107 / 1 The Three-Dimensional Flow Simulation of a Flapping Wing #04.優質教育 #09.產業創新與基礎設施 #17.夥伴關係 2019-08-12
106 / 2 Low-cost Test Rig for Aerodynamic Evaluation of Ornithopters #04.優質教育 #17.夥伴關係 2019-03-08
106 / 2 Application of flexible four-in-one microsensor to internal real-time monitoring of proton exchange membrane fuel cell #04.優質教育 #09.產業創新與基礎設施 2019-08-12
107 / 1 Self-powered hybrid flexible nanogenerator and its application in bionic micro aerial vehicles #04.優質教育 #09.產業創新與基礎設施 #17.夥伴關係 2022-08-17
107 / 2 Fabrication of flapping wing mechanism using fused deposition modeling and measurement of aerodynamic forces #04.優質教育 #09.產業創新與基礎設施 2019-08-12
108 / 1 Synthesis, analysis and 3D printing of flapping mechanisms #04.優質教育 #09.產業創新與基礎設施 2020-06-30
108 / 2 Inertial Effect on the Time-Averaged Lift of Flapping Wings #04.優質教育 #09.產業創新與基礎設施 2021-07-07
109 / 1 Dynamical modeling and boundary vibration control of a rigid-flexible wing system #07.可負擔的潔淨能源 #08.尊嚴就業與經濟發展 #17.夥伴關係 2021-07-07
109 / 2 Fabrication, aerodynamic measurement and performance evaluation of corrugated flapping wings #07.可負擔的潔淨能源 #08.尊嚴就業與經濟發展 #17.夥伴關係 2022-07-04
110 / 2 Computational fluid dynamic analysis of amphibious unmanned aerial vehicle #04.優質教育 #09.產業創新與基礎設施 2023-07-14
109 / 2 Check-valve design in enhancing aerodynamic performance of flapping wings #09.產業創新與基礎設施 #17.夥伴關係 2022-07-14
110 / 1 Soap film visualization of a 10 cm-span flapping wing #04.優質教育 #09.產業創新與基礎設施 2022-07-18
110 / 1 Design and numerical simulation of biomimetic structures to capture particles in a microchannel #09.產業創新與基礎設施 #17.夥伴關係 2023-07-14
110 / 1 Design and development of unibody quadcopter structure using optimization and additive manufacturing technique #09.產業創新與基礎設施 #17.夥伴關係 2022-07-04
110 / 1 CMOS compatible MEMS air velocity sensor with improved sensitivity and linearity for human thermal comfort sensing applications #09.產業創新與基礎設施 #17.夥伴關係 2022-07-18
112 / 2 Fabrication of flapping-wing micro mechanism assembly using selective laser melting and aerodynamic performance measures #09.產業創新與基礎設施 #17.夥伴關係 2023-12-30
110 / 2 Application of Monitoring Module Three-in-One Microsensor to Real-Time Microscopic Monitoring of Polarizer Sheet in Roll-to-Roll Process #09.產業創新與基礎設施 #17.夥伴關係 2023-07-11
110 / 2 Foundry Service of CMOS MEMS Processes and the Case Study of the Flow Sensor #09.產業創新與基礎設施 #17.夥伴關係 2023-07-11
111 / 1 Flexible Micro-Sensor Packaging and Durability for Real-Time Monitoring of Vanadium Flow Batteries #09.產業創新與基礎設施 #17.夥伴關係 2023-07-11
111 / 2 Fabrication of flapping wing mechanism using various polymer based 3D printing techniques and aerodynamic performance evaluation #09.產業創新與基礎設施 #17.夥伴關係 2024-07-08
111 / 1 Enhancing the surface quality of FDM processed flapping-wing micro mechanism assembly through RSM-TOPSIS hybrid approach #09.產業創新與基礎設施 #17.夥伴關係 2023-07-11
111 / 1 A Unified Asymptotic Theory of Supersonic, Transonic, and Hypersonic Far Fields #04.優質教育 #09.產業創新與基礎設施 2023-07-11
111 / 2 Aerodynamic Evaluation of Flapping Wings with Leading-Edge Twisting #04.優質教育 2024-07-27
112 / 2 A New Silicon Mold Process for Polydimethylsiloxane Microchannels 2024-08-06
112 / 2 Initial Study of the Onsite Measurement of Flow Sensors on Turbine Blades (SOTB) 2024-08-06