| 104 / 1 |
Dynamic penetration behavior of core-material in multi-cavity co-injection molding
|
|
2017-08-30 |
| 104 / 1 |
Numerical simulation and experimental study on physical mechanism in multiple component moulding
|
|
2020-01-06 |
| 104 / 2 |
Melt Creep Recovery of Polyamide 6 and Polypropylene Nanocomposites Blended with Layered Silicate
|
#04.優質教育 #11.永續城市與社區
|
2024-03-15 |
| 104 / 2 |
Investigation of Fiber Breakage Phenomena for Different Fiber Types in Injection Molding
|
|
2018-03-13 |
| 104 / 2 |
Cavity Effect on Core Penetration in Co-Injection Multi-Cavity Molding
|
|
2019-09-02 |
| 104 / 2 |
Numerical Simulation for the Viscoelastic Effects on the Birefringence Variation for an Injected Optical Lens
|
|
2018-04-16 |
| 104 / 2 |
如何應用CAE(電腦輔助工程)技術克服多材質產品開發之挑戰
|
|
2017-10-24 |
| 105 / 1 |
Challenges of Multi-Cavity Co-Injection Molding
|
|
2016-11-29 |
| 105 / 2 |
應用三維體積收縮補償法進行射出成型產品翹曲變形之優化: 以手機外殼為例
|
|
2018-04-16 |
| 105 / 2 |
Simulation of dynamic gas penetrations on fingering behaviors during gas-assisted injection molding
|
|
2018-08-16 |
| 105 / 2 |
Numerical visualization and optimization on the core penetration in multi-cavity co-injection molding with a bifurcation runner structure
|
|
2018-03-29 |
| 105 / 2 |
Study on the Micro-structures of Long Fiber through Runner and Cavity in Injection Molding for Reinforced Thermoplastics (FRT)
|
|
2017-10-12 |
| 105 / 2 |
Optimizing the warpage of injection molding parts using 3D volume shrinkage compensation method
|
|
2019-09-02 |
| 105 / 2 |
The Different Viscosity Arrangement Effects on the Variation of Interface between Skin and Core in Co-injection Molding
|
|
2017-10-19 |
| 105 / 2 |
不同高分子材料特性差異與組合對共射系統中皮層/芯層界面變化之影響
|
|
2018-03-29 |
| 106 / 2 |
Simulation Prediction of the Fiber Breakage History in Regular and Barrier Structure Screws in Injection Molding
|
|
2019-04-09 |
| 106 / 2 |
Geometrical Effects on Fiber Micro-structure Variations and the Influences on Long Fiber Reinforced Thermoplastics (FRT) Parts
|
|
2019-05-31 |
| 106 / 2 |
How to use CAE to Diagnose the Performance Problem of the Existed Machine in Injection Molding to Face Automation Challenge
|
|
2019-05-31 |
| 106 / 2 |
Investigation on the Viscosity Characterization of the Glass Mat Thermoplastics (GMT) in Compression Molding System
|
|
2019-05-31 |
| 105 / 2 |
Miscibility and toughness improvement of poly(lactic acid)/poly(3-Hydroxybutyrate) blends using a melt-induced degradation approach
|
#04.優質教育 #11.永續城市與社區 #12.負責任的消費與生產
|
2024-04-12 |
| 107 / 2 |
Investigation of the Viscoelastic Behavior Variation of Glass Mat Thermoplastics (GMT) in Compression Molding
|
|
2020-03-13 |
| 107 / 2 |
Viscoelastic Effect on the Warpage Prediction Accuracy and Experimental Validation in Injection Molding.
|
|
2019-10-03 |
| 107 / 2 |
Study on the Viscoelasticity Properties of the Glass Mat Thermoplastics (GMT) in Compression Molding System.
|
|
2020-01-09 |
| 107 / 2 |
Investigation on the Microstructures of Long Fiber and Their Influences on Warpage and Mechanical Property in Injection Reinforced Thermoplastics (FRT) Parts.
|
|
2020-02-19 |
| 107 / 2 |
Investigation on the internal mechanism of the deviation between numerical simulation and experiments in injection molding product development
|
|
2020-03-12 |
| 107 / 2 |
玻璃纖維氈(GMT)在壓縮成型製程中黏彈特性如何變化之研究
|
|
2019-09-10 |
| 108 / 1 |
Investigation on the Fiber Orientation Distributions and Their Influence on the Mechanical Property of the Co-Injection Molding Products
|
#08.尊嚴就業與經濟發展 #09.產業創新與基礎設施 #12.負責任的消費與生產
|
2020-07-09 |
| 108 / 2 |
Machine Calibration Effect on the Optimization through Design of experiments (DOE) in Injection Molding
|
#08.尊嚴就業與經濟發展 #09.產業創新與基礎設施 #11.永續城市與社區 #12.負責任的消費與生產
|
2020-07-20 |
| 108 / 2 |
Study on the Design-induced Fiber Orientation and Their Influences on Warpage in Injection Fiber Reinforced Plastic (FRP) Parts
|
#08.尊嚴就業與經濟發展 #09.產業創新與基礎設施 #11.永續城市與社區 #12.負責任的消費與生產
|
2020-07-20 |
| 108 / 2 |
Flow-induced Orientations of Fibers and Their Influences on Warpage and Mechanical Property in Injection Fiber Reinforced Plastic (FRP) Parts.
|
#08.尊嚴就業與經濟發展 #09.產業創新與基礎設施 #11.永續城市與社區 #12.負責任的消費與生產
|
2021-07-02 |
| 109 / 1 |
Investigation on the Machine Calibration Effect on the Optimization through Design of experiments (DOE) in Injection Molding Parts
|
#08.尊嚴就業與經濟發展 #09.產業創新與基礎設施 #11.永續城市與社區 #12.負責任的消費與生產
|
2021-07-02 |
| 109 / 1 |
Investigation on the Coupling Effects Between Flow and Fibers on Fiber-Reinforced Plastic (FRP) Injection Parts
|
#07.可負擔的潔淨能源 #08.尊嚴就業與經濟發展 #09.產業創新與基礎設施 #11.永續城市與社區 #12.負責任的消費與生產
|
2021-07-02 |
| 109 / 1 |
Influence of low-fracture-fiber mechanism on fiber/melt-flow behavior and tensile properties of ultra-long-glass-fiber-reinforced polypropylene composites injection molding
|
#07.可負擔的潔淨能源 #08.尊嚴就業與經濟發展 #09.產業創新與基礎設施 #11.永續城市與社區 #12.負責任的消費與生產
|
2021-07-02 |
| 109 / 2 |
STUDY ON THE QUANTIFICATION OF THE ADVANCEMENT OF CORE MATERIAL IN CO-INJECTION MOLDING PRODUCTS
|
#08.尊嚴就業與經濟發展 #09.產業創新與基礎設施 #11.永續城市與社區 #12.負責任的消費與生產
|
2022-03-06 |
| 109 / 2 |
STUDY ON THE FLOW-FIBER COUPLING EFFECT AND ITS INFLUENCE ON THE SHRINKAGE OF FIBER-REINFORCED PLASTIC (FRP) INJECTION PARTs
|
#08.尊嚴就業與經濟發展 #09.產業創新與基礎設施 #11.永續城市與社區 #12.負責任的消費與生產
|
2022-03-06 |
| 109 / 2 |
INVESTIGATION ON THE DEGREE OF ASSEMBLY FOR COMPONENTS IN AN INJECTION FAMILY MOLD SYSTEM
|
#08.尊嚴就業與經濟發展 #09.產業創新與基礎設施 #11.永續城市與社區 #12.負責任的消費與生產
|
2022-03-06 |
| 109 / 2 |
The Low Breaking Fiber Mechanism and Its Effect on the Behavior of the Melt Flow of Injection Molded Ultra-Long Glass Fiber Reinforced Polypropylene Composites
|
#08.尊嚴就業與經濟發展 #09.產業創新與基礎設施 #11.永續城市與社區 #12.負責任的消費與生產
|
2022-07-13 |
| 109 / 2 |
纖維強化塑膠在射出成型製程中熔膠流動與纖維耦合效應之探索
|
#08.尊嚴就業與經濟發展 #09.產業創新與基礎設施 #11.永續城市與社區 #12.負責任的消費與生產
|
2022-03-06 |
| 110 / 1 |
A Methodology to Predict and Optimize Ease of Assembly for Injected Parts in a Family-Mold System
|
#04.優質教育 #08.尊嚴就業與經濟發展 #12.負責任的消費與生產
|
2022-07-13 |
| 110 / 2 |
Discover Physical Mechanism of Interface Formation in Co-injection Using Rheological Behavior
|
#04.優質教育 #12.負責任的消費與生產
|
2022-08-17 |
| 110 / 2 |
Study on Machine identification and its effect on the RSM Optimization in Injection Molding
|
#04.優質教育 #12.負責任的消費與生產
|
2022-08-17 |
| 110 / 2 |
Fabrication and Property Characterization of Long-Glass-Fiber-Reinforced Polypropylene Composites Processed Using a Three-Barrel Injection Molding Machine
|
#04.優質教育 #12.負責任的消費與生產
|
2023-06-30 |
| 110 / 2 |
熔膠流動與纖維耦合效應對纖維排向與其射出成品幾何變化關聯性之研究
|
#04.優質教育 #11.永續城市與社區 #12.負責任的消費與生產
|
2022-08-24 |
| 111 / 1 |
Correlation Between Fiber Orientation and Geometrical Shrinkage of Injected Parts Under the Influence of Flow-Fiber Coupling Effect
|
#04.優質教育 #11.永續城市與社區 #12.負責任的消費與生產
|
2023-07-03 |
| 111 / 1 |
Influence of back pressure and geometry on microstructure of injection-molded long-glass-fiber-reinforced polypropylene ribbed plates.
|
#04.優質教育 #11.永續城市與社區 #12.負責任的消費與生產
|
2023-06-30 |
| 111 / 1 |
Investigation of Parameter Sensitivity and the Physical Mechanism for the Formation of a Core-Skin-Core (CSC) Structure in Two-Stage Co-Injection Molding
|
#04.優質教育 #11.永續城市與社區
|
2023-07-03 |
| 111 / 2 |
Study on the Flow, Foaming Characteristics and Structural Strength of Polypropylene Structural Foam Injection Molding by Innovative Nitrogen and Molten Plastic Mixing Mechanism
|
#04.優質教育 #11.永續城市與社區
|
2024-07-13 |
| 112 / 1 |
Anti-Adhesive Resorbable Indomethacin/Bupivacaine-Eluting Nanofibers for Tendon Rupture Repair: In Vitro and In Vivo Studies
|
#03.良好健康和福祉 #04.優質教育
|
2024-07-13 |
| 112 / 1 |
Novel CO2-encapsulated Pluronic F127 hydrogel for the treatment of Achilles tendon injury.
|
#03.良好健康和福祉 #04.優質教育
|
2024-08-10 |
| 112 / 1 |
Study on the fiber orientation variation due to bubble effect in fiber reinforced microcellular injection molding
|
#04.優質教育 #11.永續城市與社區
|
2024-01-30 |
| 111 / 2 |
探索共射成型製程有趣的芯-皮-芯結構
|
#04.優質教育
|
2024-03-13 |
| 112 / 2 |
Study on the Influence of Runner and Overflow Area Design on Flow–Fiber Coupling in a Multi-Cavity System
|
#04.優質教育 #11.永續城市與社區 #12.負責任的消費與生產
|
2024-08-06 |
| 112 / 2 |
從台灣碳權交易啟動探討企業即將面臨之挑戰
|
#11.永續城市與社區 #13.氣候行動
|
2024-08-06 |
| 113 / 1 |
Impact of Runner Size, Gate Size, Polymer Viscosity, and Molding Process on Filling Imbalance in Geometrically Balanced Multi-Cavity Injection Molding
|
#04.優質教育 #09.產業創新與基礎設施
|
2024-10-23 |