期刊論文
| 學年 | 111 |
|---|---|
| 學期 | 1 |
| 出版（發表）日期 | 2022-09-15 |
| 作品名稱 | Influence of back pressure and geometry on microstructure of injection-molded long-glass-fiber-reinforced polypropylene ribbed plates. |
| 作品名稱（其他語言） | |
| 著者 | Kuan-Hsun Wang; Ya-Tung Chen; Sheng-Jye Hwang*; Chao-Tsai Huang; Hsin-Shu Peng |
| 單位 | |
| 出版者 | |
| 著錄名稱、卷期、頁數 | Polymer Testing 116, 107797 |
| 摘要 | Fiber-reinforced thermoplastic components are widely used in the automotive industry and are generally fabricated using injection molding. The mechanical properties of such components are critically dependent on the length and orientation of the fibers in the molded product. In this study, a plate with both transverse and longitudinal ribs across the entire surface is designed based on the concepts of the oil pan of vehicles. The novel injection molding machine is developed to have the capability to injection molding long-fiber-reinforced thermoplastic and maintain fiber length during the molding process. The study especially emphasizes the effects of back pressure, rib thickness, and plate thickness. The results show that the fiber length increases with a decreasing back pressure and an increasing plate thickness and rib thickness. The effect of the plate thickness on the fiber length is particularly significant. Moreover, the fiber orientation of the long-side and short-side rib is more in the flow direction. |
| 關鍵字 | Injection molding;Long-fiber-reinforced thermoplastic Fiber length;Fiber orientation;Back pressure;Rib |
| 語言 | en |
| ISSN | 1873-2348;0142-9418 |
| 期刊性質 | 國外 |
| 收錄於 | SCI |
| 產學合作 | |
| 通訊作者 | Sheng-Jye Hwang |
| 審稿制度 | 是 |
| 國別 | GBR |
| 公開徵稿 | |
| 出版型式 | ,電子版,紙本 |
| 相關連結 |
機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/123279 ) |