期刊論文
| 學年 | 104 |
|---|---|
| 學期 | 1 |
| 出版（發表）日期 | 2015-12-17 |
| 作品名稱 | Dynamic penetration behavior of core-material in multi-cavity co-injection molding |
| 作品名稱（其他語言） | |
| 著者 | Huang, Chao-Tsai; Yang, Jackie Yang; Chang, Rong-Yeu |
| 單位 | |
| 出版者 | |
| 著錄名稱、卷期、頁數 | AIP Conference Proceedings 1695(1), 020002(8 pages) |
| 摘要 | Co-Injection Molding and multi-cavity molding are very common processes for plastic manufacturing. These two systems are sometimes combined and applied to some structure products. The core penetration and flow balance control problems are very difficult to manage. The inside mechanism of co-injection multi-cavity system is not fully figured out yet. In this study, we have focused on the penetration phenomena of core-material in a co-injection multicavity molding. The dynamic penetration behavior of core is very sensitive to injection flow rate and skin/core ratio. The longest core penetration has been shown to change dramatically from one runner to the other. In addition, the core penetration behavior will display imbalance at the end of filling. The more core ratio it is, the longer core penetration flows through runner to cavity. However, due to the multi-cavity geometrical structure, the balance of the core penetration for multi-cavity is still challenging. Finally, the simulation is validated with some literature. The results showed that both simulation and experiment are in a good agreement in trend. |
| 關鍵字 | co-injection;multi-cavity;core penetration |
| 語言 | en_US |
| ISSN | |
| 期刊性質 | 國外 |
| 收錄於 | EI |
| 產學合作 | |
| 通訊作者 | 黃招財 |
| 審稿制度 | 是 |
| 國別 | USA |
| 公開徵稿 | |
| 出版型式 | ,電子版 |
| 相關連結 |
機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/106336 ) |