Interconnections of Low-Temperature Solder and Metallizations
學年 109
學期 1
發表日期 2020-09-15
作品名稱 Interconnections of Low-Temperature Solder and Metallizations
作品名稱（其他語言）
著者 Y.W.Wang, C. R. Kao
作品所屬單位
出版者
會議名稱 2020 Electronics System-Integration Technology Conference
會議地點 online
摘要 The development of solder is from Pb-bearing to Pb-free solder because of toxin. Nowadays, Sn-based solder is usually chosen as the prime materials in electronic packaging. However, the melting point of Sn-based solder is higher than Pb bearing solder about 40 oC. High process temperature causes the side effects on devices such as warpage, crack and damage. Requiring the melting point of solder is below 200 oC to overcome thermal budget. In is a good candidate to replace Sn owing to its good mechanical properties. Recently, a Cu/In structure is developed for 3D integration applications. Nevertheless, fewer researches investigate low temperature reaction between Cu and In. Previous literature of Cu-In interfacial reactions were focused on thick In layer and high temperature reactions. Studying thin In layer and low temperature reactions are important for 3D IC integration. Microstructure evolution of Cu-In compounds at lowtemperature are regarded as useful database for interfacial reaction. This study not only concentrates on Cu/In reaction but also discusses deeply the reaction between Cu, In and Ni. Electroplating In layer on Cu metallization and subsequently electroplating Ni on In. The electroplating procedure is one of the major challenges because of the rapid diffusion of Cu and In. Microstructure observation are from 100 oC to 140 oC. The samples were mounted in epoxy resin and ground with SiC paper and Al2O3 powders. The reaction zone was observed using an optical microscope and a scanning electron microscope (SEM). The compositions of Cu-In and Ni-In compounds were determined using an electron microprobe (FE-EPMA). The main results were as follows: (1) (Cu,Ni)In2 formation after electroplating, (2) (Cu,Ni)In2 is stable at 100 oC, (3) (Cu,Ni)11In9 is dominant phase at 140 oC, (4) Microvoids within (Cu,Ni)11In9 and (Ni,Cu)3In7 formation at 120 oC. The result provides detailed Cu-In compounds development and key findings related to the reliability of In-based solder. This study presents the growth of intermetallic compounds in Cu/In/Ni scheme resulting from aging at 100 oC and 140 oC.
關鍵字 low-temperature process;In-based solder;Cu-In- Ni compounds;microvoids
語言 en_US
收錄於
會議性質 國際
校內研討會地點 無
研討會時間 20200915~20200918
通訊作者 Y.W.Wang (王儀雯)
國別 NOR
公開徵稿
出版型式
出處 IEEE Xplore
相關連結

機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/119004 )

SDGS 可負擔的潔淨能源,產業創新與基礎設施,夥伴關係