Investigation of Fiber Breakage Phenomena for Different Fiber Types in Injection Molding
學年 104
學期 2
出版（發表）日期 2016-05-26
作品名稱 Investigation of Fiber Breakage Phenomena for Different Fiber Types in Injection Molding
作品名稱（其他語言）
著者 Chao-Tsai (CT) Huang; Huan-Chang Tseng; Rong-Yeu Chang; Sheng-Jye Hwang
單位
出版者
著錄名稱、卷期、頁數 SPE ANTEC Indianapolis, p.1120-1125
摘要 The lightweight technologies become the driving force for people in automotives and other developments in recent years. Among those technologies, using short and long fiber-reinforced thermoplastics (FRT) to replace some metal components can reduce the weight of an automotive significantly. However, the microstructures of fiber inside plastic matrix are too complicated to manage and control during the injection molding through the screw, the runner, the gate, and then into the cavity. In this study, we have integrated the screw plastification, to injection molding for fiber microstructures investigation. Specifically, we have paid our attention on fiber breakage prediction during screw plastification. Results show that fiber breakage is strongly dependent on screw design and operation. When the screw geometry changes, the fiber breakage can be higher even if the compression ratio is lower. Moreover, the fiber breakage phenomena for two types of fibers (glass fiber and carbon fiber) are also investigated. It shows that carbon fiber is easier to be broken. Also the carbon fiber length distribution has higher peak at the exit of the screw.
關鍵字 fiber breakage;long fiber;injection molsing
語言 en_US
ISSN
期刊性質 國外
收錄於 EI
產學合作
通訊作者 黃招財=Chao-Tsai (CT) Huang
審稿制度 是
國別 USA
公開徵稿
出版型式 ,電子版
相關連結

機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/107047 )