Analysis of forming limits in metal forming processes
學年 96
學期 2
出版（發表）日期 2008-05-26
作品名稱 Analysis of forming limits in metal forming processes
作品名稱（其他語言）
著者 Li, Ching-Lun; Huang, Y.-M.; Tsai, Y.-W.; Li, C.-L.
單位 淡江大學機械與機電工程學系
出版者 Lausanne: Elsevier S.A.
著錄名稱、卷期、頁數 Journal of Materials Processing Technology 201(1-3), pp.385-389
摘要 Forming limit plays a very important role in metal forming processes since it can be used to predict whether a blank will fracture or not. This paper examines the influence on forming limit of blank and fractured thickness. The fractured thickness of a specimen in the simple tension test is adopted as the fracture criterion of the forming limit, and is applied as fracture criterion in the FEM code. The model was based on the updated Lagrangian formulation, Prandtl-Reuss flow rule, and Hill's yield criterion. in the course of analysis, if blank thickness is equal to fractured thickness, it is considered that the forming limit of the blank has been reached. This paper has analyzed the square cup drawing process and the elliptical hole-flanging process, and calculated the forming limit ratio for each process. In addition, tools were designed to perform experiments for each process. Simulations and experiments were performed with varying processes and consistent results were obtained.
關鍵字 elliptical hole-flanging process; square cup drawing process; forming limit ratio
語言 en_US
ISSN 0924-0136
期刊性質 國外
收錄於 SCI EI
產學合作
通訊作者
審稿制度
國別
公開徵稿
出版型式
相關連結

機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/60605 )

機構典藏連結
SDGS 優質教育